|Operating Temperature||-5°C to +40°C|
|Storage Temperature||-5°C to +40°C|
|Operating Humidity||20% to 80% non condensing|
|Storage Humidity||20% to 80% non condensing|
|Battery Back-up||2 hours|
|Power Supply||Input 100/220V, 50-60Hz|
|Power Supply||Output 5 Vdc 2A|
WiFi 2.4 GHz 802.11 b/g WPA PSK;
LTE Cat M1/Cat NB1/EGPRS 850/900/1800/1900MHz
BTLE – only for configuration purpose;
|Carbon Dioxide(CO2)||0-5.000 ppm||50 ppm|
|Carbon Monoxide(CO)||0-5.000 ppm||1 ppm|
|Formaldehyde(CH2O)||0-10 ppm||0,5 ppm|
|Nitrogen Dioxide(NO2)||0-30 ppm||0,1 ppm|
|Ozone(O3)||0-5 ppm||0,5 ppm|
|PM1 | PM2,5 | PM10||0-1000ug/m3||1 ug/m3|
|Relative Humidity||0-100 %Rh||1%Rh|
|Temperature||-40 – +120°C||0,1°C|
|TVOC||0-60.000 ppb||1-32 ppb|
Frequently Asked Questions
How to configure Nuvap devices?
The device acquires the information from the Wi-Fi network when it is switched on; it is therefore extremely important to switch it on and configure it in an area with a good network coverage.
- Login from the Mobile App with the credentials provided by the Nuvap account.
- Select ‘Manage N1s’ from the menu
- Select ‘Add Device’
- Scan the QRCODE that is at the bottom of the device to be configured
- Follow the guided configuration procedure from the Nuvap App
Is it possible to move the device, after its first installation?
Yes, it is possible. It might happen that moving the device it loses the wifi connectivity. In this case, in order to upload the stored data from the device to the cloud platform, either the device is registered on a new wifi network or it needs to go back under the previous wifi network coverage.
Where are Nuvap devices to be placed?
Nuvap devices are desktop mounted. The devices must be installed between 1.1-1.7 m above the floor, in places where occupants usually stay. They have to be at least 1 meter away from doors, windows and air / exhaust vents.